Siemens SITRANS P500, Operating Instructions Manual, Page: 81 / 238

Operate
6.2 Parameter description
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09
81
Enter between 2 and 30 input and output values as percentages.
Menu item Designation
1.1.10.4.3 X0
1.1.10.4.4 Y0
1.1.10.4.5 X1
... ...
1.1.10.4.61 X29
1.1.10.4.62 Y29
"1.1.11 User"
Note
This menu command is visible only if "user" has been selected under "1.1.2 PV Select"
(Page 69).
See also
"User" measurement type (Page 153)
"1.1.11.1 User Curve Unit"
Factory setting: AAAAA
Setting range: 5 characters
Purpose: Enter a user-specific unit
Description: This parameter allows you to set the unit of the user-specific measured
variable. The parameters associated with this unit are automatically con-
verted into the new unit.
The user-specific unit consists of up to 5 characters, freely selectable.
"1.1.11.2 User LRV"
Factory setting: 0
Adjustment range: Freely selectable numeric value
Purpose: Setting the start of scale value
Description: This parameter allows the start of scale value for the user scaling to be set.
The value that is set for "1.1.3.1.2 Setting LRV" (Page 69) or "1.1.3.2.2 Set
LRV with Pressure" (Page 70) is automatically assigned to this value.
The start of scale value is expressed in the units you selected under
"1.1.11.1 User Curve Unit" (Page 81).