manualshive.com logo in svg

Siemens SITRANS FM MAG 8000 IIoT, Operating Instructions Manual

Share
Download
Siemens SITRANS FM MAG 8000 IIoT Operating Instructions Manual Download Page 43

Diagnostics and troubleshooting

10

Module alarm bit

Alarm ID

Message

Action

0

AL01

Network signal strength is 
below limit

Place the antenna in a more suitable location.

2

AL03

Can not access broker

If this error is still present during the next communication cy‐
cle, please contact technical support (Page 50).

3

AL04

Wrong configuration value Check the min, max values and allowed characters in the Wire‐

less Communication Module parameter list (Page 39). Also 
check the parameters for MAG 8000.

4

AL05

MicroSD card removed

Use the procedure described for hot swapping the microSD 
card under Function button (Page 31).

5

AL06

Module reboot

If this error is still present during the next communication cy‐
cle, please contact technical support (Page 50).

6

AL07

Can not read from host de‐
vice

If this error is still present during the next communication cy‐
cle, please contact technical support (Page 50).

7

AL08

Clock synchronization 
failed

If this error is still present during the next communication cy‐
cle, please contact technical support (Page 50).

SITRANS FM MAG 8000 IIoT Wireless Communication Module
Operating Instructions, 07/2022, A5E52070595A-AA

43

Summary of Contents for SITRANS FM MAG 8000 IIoT



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands