manualshive.com logo in svg

Siemens SITRANS FM MAG 8000 IIoT, Operating Instructions Manual

Share
Download
Siemens SITRANS FM MAG 8000 IIoT Operating Instructions Manual Download Page 13

Description

3

3.1

Data transmission

The Wireless Communication Module transmits information using a wireless network (4G/LTE, 
LTE-M, NB-IoT, 2G). Automatic network selection is possible. 

Communication with users takes place through a industrial internet of things (IIoT) web 
application.

The Wireless Communication Module has the following capabilities: 

• sending and receiving to a web interface

• sending measurement data (in csv file format) by email to the predefined email addresses or 

customer specified FTP server

The measurement data collected from MAG 8000 is stored in the Wireless Communication 
Module until it is fully transmitted. In case of a power or network failure the collected data is 
stored on the SD card in the Wireless Communication Module.

.255

'514

TFSWFS

.255

Pos.

Description

①

MAG 8000 with Wireless Communication Module

②

Message Queuing Telemetry Transport (MQTT) 

③

Mobile network

④

Industrial internet of things (IIoT) web application

⑤

CSV file on FTPS server

⑥

Email with CSV or PDF file attached

Figure 3-1

Data transmission

SITRANS FM MAG 8000 IIoT Wireless Communication Module
Operating Instructions, 07/2022, A5E52070595A-AA

13

Summary of Contents for SITRANS FM MAG 8000 IIoT



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands