SITRANS F C MASSFLO
£
5
A5E02944883-A
%
Mount the sensor on a vibration-free wall or
steel frame as shown.
Ensure that the sensor is not emptied of liquid
(during normal operation) otherwise incorrect
measurement will occur.
:LWKORZIORZKRUL]RQWDOPRXQWLQJLV
UHFRPPHQGHGLQWKLVSRVLWLRQDLUEXEEOHV
DUHHDVLHUWRUHPRYH
Locate the sensor low in the system in order to
avoid an under-pressure in the sensor sepera-
ting air/gas in the liquid.
,IWKHOLTXLGLVYRODWLOHRUFRQWDLQVVROLG
SDUWLFOHVYHUWLFDOPRXQWLQJLVQRWUHFRP
-
PHQGHG
$OZD\VORFDWHWKHƋRZPHWHUDVIDUDZD\DV
possible from components that generate
mechanical vibration in the piping.
Cross talk between sensors mounted close to
each other may disturb the measurement. To
avoid cross talk never mount more than one
VHQVRURQHDFKIUDPHDQGPRXQWƋH[LEOHKRVH
connections between the sensors as shown.
,QVWDOODWLRQ
Vertical mounting
Vibration
Cross talk
,QVWDOODWLRQ
7RIDFLOLWLDWH]HURSRLQWDGMXVWPHQWDYDOYH
with tight shut-off should always be mount-
ed in connection with the sensor as a proper
]HURSRLQWVHWWLQJLVHVVHQWLDOIRUDJRRG
accuarcy.
1RWH
Please read and follow the directions stated in
the instruction SFIDK.PI.028.P1.52 regarding
build-in of sensor.
The instruction is supplied with the sensor.
Zero-point adjustment
Horizontal mounting
&DWHJRU\HTXLSPHQW
0D\EHLQVWDOOHGLQ]RQHDQG]RQH
&DWHJRU\HTXLSPHQW
6HQVRU0$66PD\EHLQVWDOOHGLQ]RQH
]RQHDQG]RQH
&DWHWRU\HTXLSPHQW
Transmitter MASS 6000 Ex-d may
RQO\
be
LQVWDOOHGLQ]RQHDQG]RQH
&RPSDFW
5HPRWH