Parameterizing the SITOP UPS1600
6.2 Switching off the UPS when the power fails by a user program
SITOP UPS1600 under STEP 7 V12
Getting Started,
37
2.
Match the addresses of the following symbols with the selected I/O address areas of the
corresponding UPS1600 parameters:
–
UPS_Buffer_mode
–
UPS_Ready_for_buffering
–
UPS_New_alarms_pending
–
UPS_battery_charge_level
3.
Save the project and load the parameters into the S7 IO controller.
When the power fails, the user program now switches off the UPS.
