Getting Started
4.3 CFC
Set I/O
Input
1.
Scroll to the left, till you see the sheet bar. There you will find a textual interconnection
named "Input WORD address of Soft Starter Module (IW x)".
Now you have two options:
–
Setting the HW input address manually, as seen in HW-Config
–
Use symbol table for selecting the input address.
Since this is a short example, we will just hand over the device input address as it is
displayed in HW-Config. We recommend using the symbol table for large projects. Please
refer to “SIMATIC Process Control System PCS 7 Engineering System”.
2.
Right click on "Input WORD address of Soft Starter Module (IW x)" and select
Interconnection to Address. A symbol table like dialog opens.
PCS 7 Library Soft Starter 3RW44 "V6.2" / "V7.1" / "V8 Migration V8.0+SP2
20
Getting Started, 05/2015, A5E02897713020A/RS-AB/004
Summary of Contents for Sirius 3RW44 V.6.2
Page 2: ......
