Siemens SIRIUS 3RB3 Manual Download Page 62

Page: 62 / 176

Mounting

7.3 Mounting/Disassembly

SIRIUS Innovations - SIRIUS 3RU2 thermal overload relays / SIRIUS 3RB3 solid-state overload relays

Manual, 09/2014, A5E03656507420A/RS-AA/002

Mounting on mounting plate

Screw mounting on a mounting plate is an alternative option to DIN rail mounting. For screw

mounting, the contactor first has to be fastened with screws and then the overload relay

mounted on the top of the contactor as shown in the figures.

Disassembly

To disassemble the contactor/relay combination from the DIN rail, press the contactor down

and pull it toward you.

Table 7- 5

Overload relay disassembly, screw-type connection system

Step

Instructions

Figure

Undo the screw on the main conductor

terminals.

Pull the overload relay down and away from

the contactor.

Summary of Contents for SIRIUS 3RB3

















































































































































































Search results

Summary of Contents for SIRIUS 3RB3

Reviews:

Related manuals for SIRIUS 3RB3

Brands by name

Popular brands

Siemens SIRIUS 3RB3, Manual

Search results

Summary of Contents for SIRIUS 3RB3

Reviews:

Related manuals for SIRIUS 3RB3

Brands by name

Popular brands