Siemens SIPROTEC 7VE61, Manual

Page: 5 / 34

3UHIDFH
iii
SIPROTEC Modbus - Bus mapping 7VE61, 7VE63
C53000-L1840-C017-03
48$/,),('3(56211(/
Within the meaning of safety precautions of this manual and the instructions, qualified
personnel are those persons who are qualified to set up, install, place into service, and
operate this device, and who possess the following qualifications:
•
Training and instruction (or other qualification) for switching, grounding, and desig-
nating devices and systems.
•
Training or instruction in accordance with safety standards for care and use of cer-
tain safety equipment.
First aid training.
7\SRJUDSKLFDQG
JUDSKLFDOFRQYHQ
WLRQV
The following text formats are used to identify concepts giving device information de-
scribed by the text flow:
3DUDPHWHUQDPHV
, or identifiers for configuration or function parameters that appear
in the device display or on the screen of a PC (with DIGSI) are shown in mono-script
(same point size) bold text. This also applies to header bars for selection menus.
3DUDPHWHUFRQGLWLRQV
, or possible settings of parameters that appear in the de-
vice display or on the screen of a PC (with DIGSI), are additionally shown in italic style.
This also applies to selection items for selection menus.
„
$QQXQFLDWLRQV
“, or identifiers for information produced by the device or required
by other devices or from the switchgear is shown in mono-script (same point size) and
placed into quotation marks.
For diagrams in which the identifier type results from the representation itself, text con-
ventions may differ from the above-mentioned.
:DUQLQJ
During operation of electrical equipment, certain parts of these devices are under high
voltage. Severe personal injury or significant equipment damage could result from
improper behaviour.
Only qualified personnel should work on this equipment or in the vicinity of this equip-
ment. These personnel must be familiar with all warnings and service procedures
described in this manual, as well as with safety regulations.
Prerequisites to proper and safe operation of this product are proper transport, proper
storage, setup, installation, operation, and maintenance of the product, as well as
careful operation and servicing of the device within the scope of the warnings and
instructions of this manual.
In particular, the general facility and safety regulations for work with high-voltage
equipment (e.g. ANSI, IEC, EN, or other national or international regulations) must be
observed. Noncompliance may result in death, injury or significant equipment
damage.