Operating Instructions SIPLUS CMS4000 ION BINARYINPUT T001
3 Installation
3.1
Type of Installation
Note
The device ION BINARYINPUT T001 may exclusively be operated when installed on a DIN rail.
3.2
Installation
Installation of the device on a DIN rail:
Hang the upper table-track of the device on the DIN rail and push it down to-
wards the DIN rail so that it snaps in.
Installation of electric connection cables:
Install the terminal block of the binary connection cables.
Install the plugs of the IEEE1394 connection cables.
Install the terminal block of the power supply connection cable.
1
3
2
picture 3 installation of the ION BINARYINPUT T001 on a DIN rail
Caution
The spaces, which are specified in chapter „Appendix“, paragraph „Dimension Drawing“, on top and under-
neath the device (25 mm) and in front of the device (80 mm) have to be kept.
3.3
Disassembly
Disassembly of electric connection cables:
Disassemble the terminal block of the power supply connection cable.
Disassemble the plugs of the IEEE1394 connection cable.
Disassemble the terminal block of the binary connection cables.
SIPLUS CMS4000 ION BI
Operating Instructions, 03/2010, A5E02185979A-02
9
