Siemens SIPIX MO/SD ZN Operating Manual Download

Page: 87 / 92

Table of contents

SIPIX MO/SD ZN
Entry-ID: 109792654, 04/2021

iem

s A

2021

ll r

igh

Error messages and solutions

9.1

Error Messages of the Application "SIPIX RC2"

Error message

Possible cause

Possible troubleshooting

Permission was denied!
Recording screen

Screen recording not allowed

Check browser

Microphone is turned off!

No microphone connected

Connect the microphone

Socket Connection
Error???

Error with the socket connection

Check network
Restart the application

Connection to server
failed! Retrying…

Socket connection error

Check network
Restart the application

The input-text does not
appear to be a valid
YouTube link

Wrong YouTube link

Enter YouTube link again

Only JPG and PNG
images are supported!

Wrong image format

Use JPG and PNG only

Invalid file type!

Wrong 3D file format

Use STL only

Data overlap! Another
download was running…"
"Download Failed"

A download is already running

Wait until the download is
finished

Session already running

A browser session is already running

End existing session

9.2

Error Messages of the SIPIX Tablet

Errors

Possible troubleshooting

Die Battery is not being charged.

–

Check that the AC adapter is properly connected and the
battery is properly inserted.

No image appears on the
screen.

–

The tablet PC may be in sleep mode. Press the ON/OFF
button to bring the tablet/display out of sleep mode.

–

The backlight setting may be too low. Increase the
illumination setting.

The screen goes blank or the
display disappears or becomes
dim.

–

Check the HotTab menu to see if the LED indicator has
been disabled.

–

Check that the AC adapter is properly connected.

–

In battery mode, check if the battery is empty, recharge the
battery if necessary.

The Wi-Fi signal is poor.

–

The tablet PC may be too far away. Move the tablet closer
to the access point or other associated wireless device.

–

Check for interfering signals in the area with good Wi-Fi
signal, such as microwave ovens, wireless phones, etc.
Move the tablet PC away from objects that can cause
interference.

Summary of Contents for SIPIX MO/SD ZN





























































































Search results

Summary of Contents for SIPIX MO/SD ZN

Reviews:

Related manuals for SIPIX MO/SD ZN

Brands by name

Popular brands

Siemens SIPIX MO/SD ZN, Operating Manual

Search results

Summary of Contents for SIPIX MO/SD ZN

Reviews:

Related manuals for SIPIX MO/SD ZN

Brands by name

Popular brands