Siemens SINAMICS Configuration Manual Download

Page: 14 / 236

3.3.1

Security measures in automation and drive technology

Siemens automation and drive technology concerns itself with security aspects at the following

levels:
● Application security

Refers to products and functions that take into consideration the needs of Industrial Security

in the field of automation. This involves particular consideration of the application and task

at hand, as well as the people performing the actions in an automated plant. This allows

industrial security to be easily implemented in production processes.

● Security support

Support from specialists with network and special industry know-how in the analysis,

planning, implementation, testing, and optimizing of Industrial Security. These services lead

to the highest possible level of industrial security and operating capacity of the production

plant.

Siemens offers comprehensive customer support based on the "Implement Security"

service: With this service you can implement protective measures to increase the security

level of plants and production facilities. You can find more information about the entire

"Implement Security" portfolio on the Internet (

https://www.industry.siemens.com/services/

global/en/portfolio/plant-data-services/industrial_security/Pages/plant-security-

services.aspx

Security measures

With increasing digitalization, comprehensive security in the automation system is becoming

ever more important. For this reason, industrial security is a core element of every product that

can be networked.
As manufacturer of automation and drive products, Siemens supports secure operation for its

customers by integrating security into its products.
● Product Lifecycle Management (PLM) process

All of the measures involving automation and drive technology are stored in the PLM

process. The PLM is certified by the German Technical Inspectorate based on

IEC 62443-4-1.

● Threat and Risk Analyses (TRAs)

Analytically potential attack threats are detected and evaluated using TRAs. Identified

critical threats are implemented in the product as necessary basic functions, based on the

motto "Security by Design".

● Code analyses

Siemens regularly performs code analyses in order to identify and correct possible errors

at an early stage during the formal check.

Industrial Security
3.3 Why is Industrial Security so important?

Industrial Security

Configuration Manual, 08/2017, A5E36912609A

Summary of Contents for SINAMICS













































































































































































































































Search results

Summary of Contents for SINAMICS

Reviews:

Related manuals for SINAMICS

Brands by name

Popular brands

Siemens SINAMICS, Configuration Manual

Search results

Summary of Contents for SINAMICS

Reviews:

Related manuals for SINAMICS

Brands by name

Popular brands