Siemens SINAMICS PERFECT HARMONY GH180, Function Manual

Page: 91 / 538

Note
Using the help feature
A help feature is available for all parameter settings. Press [SHIFT] + [0] key sequence on the
keypad, to activate the help feature.
This feature provides a text description of the desired selection, plus the parameters minimum
and maximum value if applicable. If more than two lines of help text are available, use the up [⇑]
and down [⇓] arrow keys to scroll through and view the complete help message.
Parameters are hidden in the menu display when there is insufficient security clearance to edit
the parameter.
Menu items may be hidden if they do not apply to the current drive configuration. For example:
If Network 1 Type (9901) is set to "none" then all associated parameters and menus from ID 9902
to 9966 (network configuration and register data) are not displayed.
Table Menu and Submenu Summary lists menus with associated "Off" submenu names only.
Parameters and functions found in these menus are described in the following sections. Use the
associated submenu name from this table to locate the section of the chapter that explains the
associated items.
Menu items change with new releases of software. The menu system described here may vary
slightly from the menu system on your drive. Your drive has help functions for every parameter
and these can be used if the function is not described here.
Parameter Assignment/Addressing
6.2 Safety Notes for Parameter Changes
Control Manual
Operating Manual, A5E50491925A
89