Pin
Signal name
Signal type Meaning
The 1P5 voltage is provided exclusively to supply the bus terminal.
No OLPs are permitted.
Signal type: VO = Voltage output (power supply) O = Output B = Bidirectional
Position of connectors
The following figure shows the mounting position and designation of the connectors on the
Control Unit.
'303,
;
;
'3
Figure 4-6
Position of connectors X126, X136
Connectable devices
The following devices can be connected to the PROFIBUS DP interfaces:
● PG / PC
● SIMATIC HMI devices
● SIMATIC S7 controllers with PROFIBUS DP interface
● Distributed I/O
● Teleservice adapter
● Drive units with PROFIBUS DP interface (standard slaves)
Note
A teleservice adapter can only be connected to one of the two interfaces.
A detailed, regularly updated list of the modules approved for use with SIMOTION, as well
as notes on their use, can be found on the Internet at (
support.automation.siemens.com/WW/view/en/11886029
):
Take note of the documentation on the individual modules or devices!
Interfaces
4.6 PROFIBUS DP interfaces
SIMOTION D4x5
Manual, 04/2014
61