manualshive.com logo in svg

Siemens Simotics HV C 1NA14544WA600AG0-Z, Operating Instructions And Installation Instructions

Share
Download
Siemens Simotics HV C 1NA14544WA600AG0-Z Operating Instructions And Installation Instructions Download Page 34

Damage to mounted parts and components as a result of high temperatures

The motor components get very hot during operation. High temperatures can damage parts 

mounted by customers, such as cables manufactured out of materials that are not heat 

resistant. 
● Temperature-sensitive parts must not come in contact with or be attached to components 

mounted on the machine.

● Only use heat-resistant mounting parts. The connecting cables and cable entries must be 

suitable for the particular application.

5.1.2

Insulation resistance and polarization index

Measuring the insulation resistance and polarization index (PI) provides information on the 

condition of the machine. It is therefore important to check the insulation resistance and the 

polarization index at the following times:     
● Before starting up a machine for the first time
● After an extended period in storage or downtime
● Within the scope of maintenance work
The following information is provided regarding the state of the winding insulation:
● Is the winding head insulation conductively contaminated?
● Has the winding insulation absorbed moisture?
As such, you can determine whether the machine needs commissioning or any necessary 

measures such as cleaning and/or drying the winding:
● Can the machine be put into operation?
● Must the windings be cleaned or dried?
Detailed information on testing and the limit values can be found here:
"Testing the insulation resistance and polarization index"  (Page 35) 

Assembly
5.1 Preparations for installation

SIMOTICS HV C  1NA14544WA600AG0-Z

34

Operating Instructions 06/2018

Summary of Contents for Simotics HV C 1NA14544WA600AG0-Z

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands