7.4
SCP transceiver
SC connectors
The attachment to Industrial Ethernet uses SC connector
technology (Subscriber Connector).
7.4.1
SCP992-1
Properties
Transmission mode
1000Base-SX complying with IEEE 802.3
Transmission rate
1000 Mbps (Gigabit Ethernet)
Transmission medium
Multimode fiber-optic cable
Light source
Class1-LASER "Eye safe"
Wavelength
850 nm
Cable length (max.) *
)
At 50 µm fiber core diameter
750 m
At 62.5 µm fiber core diameter
350 m
Transmitter output (optical)
Minimum
-9.5 dBm
Maximum
-4 dBm
Receiver input
Sensitivity min.
-17 dBm
Input power max.
-3 dBm
*
)
Depending on the cable used, you can find additional information in the "Industrial Ethernet /
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
7.4.2
SCP992-1LD
Properties
Transmission mode
1000Base-LX complying with IEEE 802.3
Transmission rate
1000 Mbps (Gigabit Ethernet)
Transmission medium
Single mode fiber-optic cable
Light source
Class1-LASER "Eye safe"
Wavelength
1310 nm
Cable length (max.) *
)
10 km
Transmitter output (optical)
Minimum
-9.5 dBm
Maximum
-3 dBm
Technical data
7.4 SCP transceiver
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 12/2017, A5E02630804-11
33
