Siemens SIMATIC S5-90U System Manual Download Page 60

Page: 60 / 622

Installation Guidelines

S5-90U/S5-95U

Installing the interface module

Hook the interface module to the standard mounting rail.

Swing the interface module back until the slide on the bottom snaps into place on the rail.

Use the flat ribbon cable to connect the module to the last bus unit.

Use connecting cable 712-8 to join the two interface modules (in the case of the IM 318).

Connect the cable to the "out" socket on the PLC tier and to the "in" socket on the expansion
tier.

Securely screw the connecting cable plugs in place.

Removing the interface module

Only for IM 316: Loosen the hold-down screws of the plugs and remove the connecting cable.

Remove the connecting flat ribbon cable from the adjacent bus unit.

Use a screwdriver to press down on the slide located on the bottom of the interface module.

Swing the module up and out of the standard mounting rail.

3-12

EWA 4NEB 812 6115-02b

Summary of Contents for SIMATIC S5-90U















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIMATIC S5-90U

Reviews:

Related manuals for SIMATIC S5-90U

Brands by name

Popular brands

Siemens SIMATIC S5-90U, System Manual

Search results

Summary of Contents for SIMATIC S5-90U

Reviews:

Related manuals for SIMATIC S5-90U

Brands by name

Popular brands