Siemens SIMATIC S5 3964, Manual

Page: 2 / 20

SIMATIC S5 3964(R) Driver
GP-Pro EX Device/PLC Connection Manual
2
Introduction
This manual describes how to connect the Display and the External Device (target PLC).
In this manual, the connection procedure is described in the sections identified below:
1
System Configuration
This section lists the types of External
Devices and SIO that you can connect.
)
"1 System Configuration" (page 3)
2
External Device Selection
Select a model (series) of the External
Device and its connection method.
)
"2 External Device Selection" (page 7)
3
Communication Settings
This section shows setting examples for
communicating between the Display and
the External Device.
)
"3 Communication Settings" (page 8)
4
Setup Items
This section describes communication
setup items on the Display.
Set the Display’s communication settings
in GP-Pro EX or in offline mode.
)
"4 Setup Items" (page 11)
5
Cable Diagrams
This section shows cables and adapters
for connecting the Display and the
External Device.
)
"5 Cable Diagram" (page 15)
Operation