SIMATIC RF382R Scanmode
J31069-D0214-U001-A4-7618, 10/2013
11
Data
Parameters
The following table lists the parameters available in the reader. The byte count refers to the entry in the "Change parameter"
telegram to the reader.
If a parameter value consists of two bytes, the MSB is always transferred first.
xth byte Value
Meaning
0
21
21
Current length of the parameters in the telegram (in bytes)
1
1
255
0
ISO general
ISO user-defined
RF300
"Tag type" parameter
Setting of the air interface/tags used
2
30
0-100
30%
0-100%
"Modulation" parameter
Optimization of the air interface - setting is only possible by selecting
"ISO user-defined"
3
0
1
single
double
"Sub Carrier" parameter
Optimization of the air interface - setting is only possible by selecting
"ISO user-defined"
4
0
1
high
low
"Data Rate" parameter
Optimization of the air interface - setting is only possible by selecting
"ISO user-defined"
5
1
16
Singletag
reserved
"Mode of operation" parameter
Only the singletag setting is possible, i.e. several tags in the field will
not be detected or processed
6
0
1
Continuous Read
Single Read
"Scan mode type" parameter
Selection of scan mode sequence
7+8
10
1-65535
10 * 100 ms
(1..65535) * 100 ms
"Lock Time" parameter
Setting of Lock Time duration for Continuous Read Mode
9
5
2
3
4
6
7
8
1.25 W
0.5 W
0.75 W
1 W
1.5 W
1.75
2 W
"Transmit power" parameter
The transmit power setting to optimize communication with tags is
only possible with RF38xR
10
1
2
RS-232
RS-422
"Physical interface" parameter
Setting the physical interface is only possible with RF38xR
11
2
0
1
3
5
38400
9600
19200
57600
115200
"Baud rate" parameter
Baud rate setting - applies to scan mode, test mode, and telegram
communication
12
0
1
2
none
even
odd
"Parity" parameter
Parity bit setting - applies to scan mode, test mode, and telegram
communication
13
0
1
2
only UID
only user data
UID and user data
"Data record" parameter
Combination of data that the reader automatically transfers to the
host in scan mode
