Installing the Device
2.4.1 Mounting the Device on a DIN Rail
Note
For detailed dimensions of the device with either DIN rail or panel hardware installed,
"Dimension Drawings (Page 32)"
.
2.4.1
Mounting the Device on a DIN Rail
The RUGGEDCOM RS900W can be ordered with a DIN rail adapter preinstalled on the
back of the chassis. Use the adapter to mount the device to a standard 35 mm (1.4
in) IEC/EN 60715 or TS35 DIN rail.
Mounting the Device
To mount the device to a DIN rail, do the following:
1. Hook the top teeth of the adapter onto the DIN rail.
Note
The adapter features a sliding release with a slot at the bottom for a flathead
screwdriver.
1
2
3
2
1
1
1
DIN Rail
2
DIN Rail Adapter
Figure 2.1
Mounting the Device to a DIN Rail
2. Insert a flathead screwdriver into the slot of the sliding release and move it
down.
10
RUGGEDCOM RS900W
Installation Manual, 04/2021, C79000-G8976-1028-13
