5. Screw the bus adapter to the BaseUnit of the device with the supplied screw (tightening
torque 0.2 Nm)
②
.
Use the specified tool for this.
6. Insert the connection plugs into the sockets intended for this on the bus adapter.
Removal
To remove a bus adapter, follow the steps below:
1. Turn off the power to the device.
2. Remove all connected cables from the BusAdapter.
3. Loosen the screw connection of the bus adapter.
4. Pull the bus adapter out of the Base Unit to the front.
5. If necessary remove the strain relief, see section "Mounting tensile strain relief (Page 54)".
6. Close the bus adapter slot with a cover.
Installation and removal
4.7 Mounting bus adapters
SCALANCE X-200
Operating Instructions, 11/2021, C79000-G8976-C284-15
53
