Certification
6.1.2 CSA/Sira
The device is marked with a CSA symbol that indicates compliance with both
Canadian and U.S. requirements.
C
US
It is specifically approved for use in hazardous locations defined as:
• Class I, Division 2, Groups A, B, C, D
• Ex nA nC IIC T4 Gc
• Class I, Zone 2, AEx nA nC IIC T4 Gc
A copy of the CSA Certificate of Compliance is available via Siemens Industry Online
https://support.industry.siemens.com/cs/ww/en/view/109744578
.
6.1.2
CSA/Sira
This device meets the requirements of the following CSA/Sira standards and is
approved for use in hazardous locations under certificates Sira 15ATEX4323X and
IECEx CSA 16.0004X:
•
Directive 94/9/EC (ATEX)
ATEX – Directive of the European Parliament and the Council of 23 March 1994
on the Approximation of the Laws of the Member States Concerning Equipment
and Protective Systems Intended for Use in Potentially Explosive Atmospheres
•
IEC 60079-0, Edition 6.0 (2011)/EN 60079-0:2012
Explosive Atmospheres – Part 0: Equipment – General Requirements
•
IEC 60079-15, Edition 4.0 (2010)/EN 60079-15:2010
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection
N
The device is marked with an ATEX marking.
II 3 G Ex nA nC IIC T4 Gc
Note
For the maximum ambient temperature, refer to the hazardous location label affixed
to the device.
A copy of the CSA/Sira Certificate of Compliance is available via Siemens Industry
https://support.industry.siemens.com/cs/ca/en/view/109747427
50
RUGGEDCOM RX1400
Installation Manual, 01/2021, C79000-G8976-1103-17
