Certification
6
The RUGGEDCOM RST916C device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
6.1
Approvals
This section details the standards to which the RUGGEDCOM RST916C complies.
6.1.1
CSA
This device meets the requirements of the following Canadian and U.S. standards
under certificate CSA 21CA80047239:
•
CAN/CSA C22.2 No. 62368-1-07 AMD 2:2014
Information Technology Equipment – Safety – Part 1: General Requirements
•
CSA Std. C22.2 No. 213-17
Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous
Locations
•
CAN/CSA-C22.2 No. 60079-0:19
Explosive Atmospheres – Part 0: Equipment – General Requirements
•
CAN/CSA-C22.2 No. 60079-7:16
Explosive atmospheres — Part 7: Equipment protection by increased safety “e”
•
CAN/CSA-C22.2 No. 60079-15:18
Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Construction, Test
and Marking of Type of Protection "n" Electrical Apparatus
•
ANSI/UL 62368-1-2014
Information Technology Equipment – Safety Part 1: General Requirements
•
UL 121201 Ninth Edition
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Division 1 and 2 Hazardous (Classified) Locations
•
ANSI/UL 60079-0:19
Electrical Apparatus for Explosive Gas Atmospheres – Part 0: General
Requirements
RUGGEDCOM RST916C
Installation Manual, 04/2021, C79000-G8976-1490-03
33
