Siemens SIMATIC NET RUGGEDCOM RSG2200, Installation Manual

Page: 40 / 54

Technical Specifications
5
This section details the specifications and operating conditions of the device.
5.1 Power Supply Specifications
The RUGGEDCOM RSG2200 can be equipped with the following power supplies:
NOTICE
Electrical hazard – risk of damage to the device
Make sure power input to the device is within the specified input range.
Input Range Power
Supply Type
Minimum Maximum
Internal Fuse
Rating
ab
Maximum Power
Consumption
c
24 VDC 10 VDC 36 VDC 6.3 A(F)
48 VDC 36 VDC 72 VDC 3.15 A(T)
HI (125/250 VDC)
d
88 VDC 300 VDC 2 A(T)
HI (110/230 VAC)
d
85 VAC 264 VAC 2 A(T)
28 W
a
(F) denotes fast-acting fuse
b
(T) denotes time-delay fuse.
c
Power consumption varies based on configuration. 10/100Base-TX ports consume roughly 1 W less than
fiber optic ports.
d
The HI power supply is the same power supply for both AC and DC.
5.2 Failsafe Relay Specifications
Maximum Switching
Voltage
250 VAC, 125 VDC
Rated Switching
Current
2 A @ 250 VAC, 0.15 A @ 125 VDC, 2 A @ 30 VDC
Maximum Switching
Capacity
150 W, 500 VA
5.3 Supported Networking Standards
Standard 10 Mbps Ports 100 Mbps
Ports
1000 Mbps
Ports
Description
IEEE 802.3u
ü
100BaseTX/100BaseFX
RUGGEDCOM RSG2200
Installation Manual, 04/2021, C79000-G8976-1043-17
31