Siemens SIMATIC NET RUGGEDCOM RS950G, Installation Manual

Page: 31 / 40

Technical Specifications
5.4 Copper Ethernet Port Specifications
Standard 10 Mbps
Ports
100 Mbps
Ports
1000 Mbps Ports Notes
IEEE
802.1Q
ü ü ü
VLAN (Virtual LAN)
IEEE 802.1p
ü ü ü
Priority Levels
5.4 Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered
with the RUGGEDCOM RS950G.
Speed Connector Duplex
a
Cable Type
b
Wiring
Standard
c
Maximum
Distance
d
Isolation
e
100Base-TX RJ-45 FDX/HDX > CAT 5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
100/1000Base-
TX
RJ-45 FDX/HDX > CAT 5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
a
Auto-Negotiating
b
Shielded or unshielded.
c
Auto-crossover and auto-polarity.
d
Typical distance. Dependent on the number of connectors and splices.
e
RMS 1 minute.
5.5 Operating Environment
Ambient Operating
Temperature
ab
-40 to 85 °C (-40 to 185 °F)
Ambient Relative
Humidity
c
5% to 95%
Ambient Storage
Temperature
-40 to 85 °C (-40 to 185 °F)
a
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
b
Operating temperature may vary based on the limitations of installed SFPs. Refer to the RUGGEDCOM
SFP Transceivers Catalog for SFP temperature ratings.
c
Non-condensing.
5.6 Mechanical Specifications
Weight 1.22 kg (2.7 lb)
Ingress Protection IP30
Enclosure 20 AWG Galvanized Steel
22
RUGGEDCOM RS950G
Installation Manual, 01/2021, C79000-G8976-1037-06