background image

 

 

 

A5E03375783A-02 

Wir haben den Inhalt der Druckschrift auf Übereinstimmung mit 
dem beschriebenen Produkt geprüft. Dennoch können 
Abweichungen nicht ausgeschlossen werden, so dass wir für 
die vollständige Übereinstimmung keine Gewähr übernehmen. 
Die Angaben in der Druckschrift werden jedoch regelmäßig 
überprüft. Notwendige Korrekturen sind in den nachfolgenden 
Auflagen enthalten. Für Verbesserungsvorschläge sind wir 
dankbar.

 

 Technische Änderungen vorbehalten.

 

Weitergabe sowie Vervielfältigung dieser Unterlage, 
Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit 
nicht ausdrücklich zugestanden. Zuwiderhandlungen 
verpflichten zu Schadenersatz. Alle Rechte vorbehalten, 
insbesondere für den Fall der Patenterteilung oder GM-
Eintragung.

 

 

Copyright © Siemens AG 2018

 

All Rights Reserved

 

Wichtiger Hinweis 

Wir weisen darauf hin, dass der Inhalt dieser Montageanleitung nicht Teil einer früheren oder bestehenden Vereinbarung, 
Zusage oder eines Rechtsverhältnisses ist oder diese abändern soll. Sämtliche Verpflichtungen von Siemens ergeben sich aus 
dem jeweiligen Kaufvertrag, der auch die vollständige und allein gültige Gewährleistungsregel enthält. Diese vertraglichen 
Gewährleistungsbestimmungen werden durch die Ausführungen dieser Montageanleitung weder erweitert noch beschränkt. 

Wir weisen außerdem darauf hin, dass aus Gründen der Übersichtlichkeit in dieser Montageanleitung nicht jede nur erdenkliche 
Problemstellung im Zusammenhang mit dem Einsatz dieses Produkts beschrieben werden kann. Sollten Sie weitere 
Informationen benötigen oder sollten besondere Probleme auftreten, die in der Montageanleitung nicht ausführlich genug 
behandelt werden, können Sie die erforderliche Auskunft über die örtliche Siemens-Niederlassung anfordern. 

Anforderung an die Qualifikation des Personals 

Qualifiziertes Personal im Sinne dieser Montageanleitung bzw. der Warnhinweise sind Personen, die mit Aufstellung, Montage, 
Inbetriebsetzung und Betrieb dieses Produktes vertraut sind und über die ihrer Tätigkeit entsprechenden Qualifikation verfügen 
und in erster Hilfe geschult sind. 

 

_________________________________________________________________________________ 

We have checked the contents of this manual for agreement 
with this outlet described. Since deviations cannot be 
precluded entirely, we cannot guarantee full agreement. 
However, the data in this manual are reviewed regularly and 
any necessary corrections included in subsequent editions. 
Suggestions for improvement are welcome.

 

 Technical data subject to change.

 

The reproduction, transmission or use of this document or its 
contents is not permitted without express written authority. 
Offenders will be liable for damages. All rights, including rights 
created by patent grant or registration of a utility or design, are 
reserved.

 

 

Copyright © Siemens AG 2018

 

All Rights Reserved

 

Note 

We would point out that the contents of this assembly instrucions shall not become a part of or modify any prior or existing 
agreement, commitment or legal relationship. The Purchase Agreement contains the complete and exclusive obligations of 
Siemens. Any statements contained in this documentation do not create new warranties or restrict the existing warranty. 

We would further point out that, for reasons of clarity, these assembly instrucions cannot deal with every possible problem 
arising from the use of this device. Should you require further information or if any special problems arise which are not 
sufficiently dealt with in the operating instructions, please contact your local Siemens representative. 

Personnel qualification requirements 

Qualified personnel as referred to in the assembly instrucions or in the warning notes are defined as persons who are familiar 
with the installation, assembly, startup and operation of this product and who possess the relevant qualifications for their work 
and have a First Aid qualification. 

Summary of Contents for SIMATIC NET PROFIBUS SpliTConnect 6GK1905-0AA00

















Reviews: