MODEM MD720 in Terminal Mode
Fehler! Verweisquelle konnte nicht gefunden werden.
29
ATS0
Configures Automatic answering
Executive command
Command:
ATS0=<n>
Response:
OK
Parameter:
<n>:
0:
automatic answering deactivated <Default>
1-255:
number of rings before automatically answering
Notice:
GSM networks usually generate only 8-12 RING. If S0 is set to a higher value, calls are
eventually not being answered.
ATV
Set result code format mode
Executive command
Command:
ATV[<value>]
Response:
0
When numeric mode is activated
OK
When verbose mode is activated
Parameter:
<value>:
0
Information
<text><CR><LF>
Result Code (short format):
<numeric code><CR>
1
Information
<CR><LF><text><CR><LF>
Result Code (long format):
<CR><LF><verbose code><CR>
<Default>
Notice:
This parameter setting determines the contents of the header and trailer transmitted with
result codes and information responses.
Result codes numeric or verbose:
OK
0
Command executed, no error, Restart executed
CONNECT
1
Connection established
RING
2
Ring detected
NO CARRIER
3
Connection not established or interrupted
ERROR
4
Command not valid
NO DIALTONE
6
No dialtone, dialing not possible, wrong mode
BUSY
7
Remote station busy
CONNECT 2400/RLP
1
Connect at 2400 bps and Radio Link Protocol
CONNECT 4800/RLP
1
Connect at 4800 bps and Radio Link Protocol
CONNECT 9600/RLP
1
Connect at 9600 bps and Radio Link Protocol
