Siemens SIMATIC NET CP 1628, Operating Instructions Manual

Page: 6 / 22

Preface
CP 1628
6
Operating Instructions, 06/2021, C79000-G8976-C280-09
Further documentation
The documents listed below contain more detailed information on commissioning and using
the communications processor.
Enter the entry ID shown below of the relevant manual as the search item.
•
Configuration manual Commissioning PC Stations
This provides you with detailed information on commissioning and configuring SIMATIC
NET PC communications modules.
Entry ID:
77377601 ( https://support.industry.siemens.com/cs/ww/en/view/77377601 )
• SIMATIC NET - Industrial Communication with PG/PC
– Volume 1 – Basics (system manual)
Entry ID:
77376110 ( https://support.industry.siemens.com/cs/ww/en/view/77376110 )
– Volume 2 – Interfaces (programming manual)
Entry ID:
77378184 ( https://support.industry.siemens.com/cs/ww/en/view/77378184 )
The system manuals introduce the topic of industrial communication and explain the
communications protocols used. There is also a description of the OPC interface as user
programming interface.
• Installation manual SIMATIC NET PC Software
This document contains detailed information on installing the "SIMATIC NET
PC Software".
Entry ID:
77377602 ( https://support.industry.siemens.com/cs/ww/en/view/77377602 )
• System manual Industrial Ethernet Network Manual
In this document you will find detailed information about setting up an Industrial Ethernet
network.
Entry ID:
27069465 ( https://support.industry.siemens.com/cs/ww/en/view/27069465 )
SIMATIC NET documentation
You will find the entire SIMATIC NET documentation on the Product Support pages:
15247 ( https://support.industry.siemens.com/cs/ww/en/ps/15247 )
Go to the required product group and make the following settings:
→ Filter criteria for entries → entry type "Manual"
See also
Support ( https://support.industry.siemens.com/cs/ww/en/ps )