Siemens SIMATIC IPC627D Operating Instructions Manual Download

Page: 39 / 186

Installing and connecting the device

3.3 Connecting the device

SIMATIC IPC627D/827D
Operating Instructions, 09/2014, A5E32990859-AB

3.3.6

Connecting the device to networks

The following options are available for the integration in existing or planned system

environments or networks:

Ethernet

The integrated Ethernet port (10/100/1000 Mbps) can also be used for communication and

data exchange with automation devices such as SIMATIC S7.

This functionality requires the "SOFTNET S7" software package.

PROFIBUS/MPI

The optional electrically isolated PROFIBUS interface (12 Mbps) can be used to interconnect

distributed field devices or for coupling to SIMATIC S7.
The "SOFTNET for PROFIBUS" software package is required for coupling to S7 automation

systems.

PROFINET

PROFINET can be operated via

●

CP1616 IRT (Isochronous Real Time)

●

Standard Ethernet interfaces (RT)

CP 1616 on-board allows you to connect IPCs to Industrial Ethernet. Only one CP 1616 can

be installed in a PG/PC. You will find detailed information in sections "PROFINET (Page 40)"

and "CP 1616 onboard communications processor (Page 143)".

Device driver CP 16xx.sys

The device driver allow integration of the Windows network protocol in the optional "CP 1616

onboard" Ethernet PROFINET controller on SIMATIC PCs. The PROFINET interface will act

like a regular 100 Mbit Ethernet interface with a MAC address when you use this driver. The

three RJ45 sockets are connected with each other via switch.

PROFINET IO application

You can create, operate and configure PROFINET IO applications using the "Development

Kit DK-16xx PN IO. It must be installed in addition to the CP 16xx.sys device driver. This kit

and the documentation are available free of charge at the following Internet address:

Development Kit DK-16xx PN IO

(

http://www.automation.siemens.com/net/html_00/produkte/040_cp_1616_devlopkit.htm

)

SIMATIC NET

Use this software package to configure network components and connections. You will find

information on this on the SIMATIC NET DVD. This software package and the

documentation are not part of the product package.

Additional information

Additional information is available in the catalog and the online ordering system Industry Mall

(

https://mall.industry.siemens.com

Summary of Contents for SIMATIC IPC627D



























































































































































































Search results

Summary of Contents for SIMATIC IPC627D

Reviews:

Related manuals for SIMATIC IPC627D

Brands by name

Popular brands

Siemens SIMATIC IPC627D, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC627D

Reviews:

Related manuals for SIMATIC IPC627D

Brands by name

Popular brands