Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC427D
Operating Instructions, 05/2017, A5E31347215-AB
51
3.3.10
Securing the lines
Secure each line connected to the device to the strain relief using a cable tie. The cable ties
required are not included.
Requirement
●
Up to 6 cable ties for USB, Ethernet and PROFIBUS
Cable tie width 3 mm max.
●
1 cutting tool
Procedure
1. Pass the cable tie around the strain relief
bar and secure the cables as shown.
2. Cut off the protruding ends of the cable
ties.
