SIMATIC IPC427D
Operating Instructions, 05/2017, A5E31347215-AB
105
Technical specifications
8
8.1
Certificates and approvals
ISO 9001 certificate
The Siemens quality management system for our entire product creation process
(development, production and sales) meets the requirements of ISO 9001:2008.
This has been certified by DQS (the German society for the certification of quality
management systems).
Certificate no.: 001323 QM08
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
UL approval
The following approvals are available for the device:
Underwriters Laboratories (UL) according to standard UL 60950-1 and Canadian National
Standard CAN/CSA-C22.2 No. 60950-1 (I.T.E) or UL508 and to Canadian National Standard
CAN/CSA-C22.2 No. 142 (IND.CONT.EQ)
FCC and Canada
USA
Federal Commu-
nications Commis-
sion
Radio Frequency
Interference
Statement
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accord-
ance with the instruction manual, may cause harmful interference to radio com-
munications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the inter-
ference at his own expense.
Shielded Cables
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
Modifications
Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
Conditions of
Operations
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
