Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC327E
24
Operating Instructions, 06/2019, A5E40965257-AD
3.2.3
Wall mounting
Wall mounting is suitable for both horizontal and vertical mounting of the device.
Requirement
●
A screwdriver
●
Four anchors and four screws
Procedure for mounting
Place the device onto the mounting sur-
face.
Mark the fixing holes.
Drill the fixing holes.
Insert the anchors in the drilled holes.
Screw on the device.
3.3
Connecting the device
3.3.1
Notes on connecting
WARNING
Risk of fire and electric shock
The on/off switch does not isolate the device from the power supply. Risk of electric shock if
the device is opened incorrectly or defective. There is also a risk of fire if the device or
connecting lines are damaged. Death or serious bodily injury can result.
You should therefore protect the device as follows:
•
Always pull out the power plug when you are not using the device or if the device is
defective. The power plug must be freely accessible.
•
Use a central power isolating switch for cabinet installation.
