Siemens simatic ipc227e Operating Instructions Manual Download

Page: 58 / 156

Expanding and assigning parameters to the device

5.2 Installing a PCIe module

SIMATIC IPC227E

Operating Instructions, 11/2016, A5E35782395-AB

Procedure

Take the plug-in card holder out

of the housing.

Loosen the screw at the slot

plate.
Do not remove the screw com-

pletely.

Remove the slot plate by pulling

it upwards.

Pull the plug-in card adapter

from the motherboard.

Place the plug-in card onto the

the plug-in card adapter.

Insert the plug-in card.
Ensure that the connector of the

plug-in card adapter has been

inserted correctly into the slot on

the motherboard.

Tighten the screw.

Insert the plug-in card holder into

the housing.

Summary of Contents for simatic ipc227e





























































































































































Search results

Summary of Contents for simatic ipc227e

Reviews:

Related manuals for simatic ipc227e

Brands by name

Popular brands

Siemens simatic ipc227e, Operating Instructions Manual

Search results

Summary of Contents for simatic ipc227e

Reviews:

Related manuals for simatic ipc227e

Brands by name

Popular brands