IRD400
Operating Instructions, 05/2018, A5E36790512-AC
7
Overview
1
1.1
Product overview
The display unit is used to display data which is sent by a controller. Digits or symbols can
be shown in the display. The status of the controller, for example, can be signaled via the
LEDs. In addition, two controllers which are each connected to a IRD400 display unit can
communicate via the display units.
The display ensures legibility up to a distance of 10 m. You can use the integrated dimming
function to adjust the display to the ambient light conditions.
The display unit has an infrared transmitter/receiver module which is tuned to the IR remote
control with the article number 6ES7292-0CA50-0AA0 and can communicate with a display
unit of the same design. The display unit can be used with and without remote control. You
can use the IR remote control to adjust the brightness of the display on the display unit and
transmit signals to the controller via the display unit.
The display unit is configured with STEP 7 (TIA Portal).
1.2
Scope of delivery
The scope of delivery of the display unit includes:
●
1 × display unit
●
1 x accessory pack with the following contents:
–
4 mounting clips
–
4 threaded pins for the mounting clips
–
1 mains terminal for the power supply
–
1 plug connector, 12-pin
