Commissioning
8.3 Initial commissioning an open controller
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 09/2018, A5E42603425-AA
45
Result
●
The Windows 10 IOT Enterprise operating system (64-bit) is installed.
●
The "Operator" user is logged on automatically.
●
The software controller and WinCC Runtime Advanced, if required, are ready for use.
●
For administrative purposes, the "Operator" user can be logged off and the administrator
created during commissioning can be logged on.
●
The operating system's start screen is displayed after each startup.
8.3
Initial commissioning an open controller
Step
Execution
Section
1
Creating the configuration of the Open Controller 8.3.1 (Page 45)
2
Setting the IP address
3
Changing the properties of the Software Control-
ler
4
Establishing the HMI connection
5
Downloading a project to the target system
6
Transferring the license key
7
Switching the Open Controller on/off
8.3.1
Creating the configuration of the Open Controller
Requirements
The following requirements must be met before you can create the configuration of the Open
Controller:
●
TIA Portal V15 + HSP 0269 or TIA Portal
≥ V15 SP1 must be installed.
●
You have started the TIA Portal and created a new project.
Summary of Contents for SIMATIC CPU 1515SP PC2 F
Page 1: ......
