manualshive.com logo in svg

Siemens SIMATIC Box PC 840, Manual

The Siemens SIMATIC Box PC 840 is a high-performance industrial computer offering reliable and efficient operations. It comes with an extensive user manual, available for free download from [website]. This comprehensive manual equips users with the necessary instructions and information to maximize the potential of this cutting-edge product.

Share
Download
background image

Controller

8-2

SIMATIC Rack PC 840  Manual

A5E00104826-03

8.1

SCSI Controller

Overview

SCSI stands for 

S

mall 

C

omputer 

S

ystem

 I

nterface.

The SCSI controller (host adapter) acts as an interface between the internal bus
(PCI bus) and devices with an SCSI interface, called SCSI devices in the rest of
this document.

Every SCSI device, including the SCSI controller, has an SCSI bus address which
is its ID. Each ID is unique to that particular device. This description tells you how
to set up and display IDs.

The SCSI controller is a PCI module which uses PCI bus master technology. This
means that the controller can transfer data to and from the PC’s working memory
to the SCSI device quickly and without any help from the CPU (Central Processing
Unit).

Your SCSI device documentation tells you how to install and operate your SCSI
device.

Setting SCSI Addresses (IDs)

Each SCSI device that is connected to the SCSI controller must be given its own
address (ID 0 to ID 15).

The SCSI controller supports standard SCSI and ultrawide SCSI. With standard
SCSI, devices with ID 0 to ID 7 can be connected; with ultrawide SCSI, devices
with ID 0 to 15 can be connected. ID 15 has the highest priority. The controller
itself has ID 7, so it can support both types of SCSI.

•

Make sure that each SCSI device has its own unique SCSI ID.

More details about setting the SCSI address are contained in your SCSI device
documentation.

Connecting SCSI Devices

SCSI devices and the SCSI controller are connected via a common bus (SCSI
bus).

Termination (terminal resistance) must be enabled (or installed) on the SCSI
devices connected at the ends of the SCSI cable. Termination must be disabled (or
removed) on all other SCSI devices.

Your SCSI device documentation tells you how to enable or disable termination on
SCSI devices that have been added on later.

•

Make sure that termination is properly installed.

•

Connect the devices via the SCSI cable to the SCSI connector on the system

module.

•

The SCSI controller terminator must be disabled when you connect devices

with the external SCSI bus.

Summary of Contents for SIMATIC Box PC 840





















































































































































































































Reviews:

No comments

Related manuals for SIMATIC Box PC 840

OMCA 930 Use And Maintenance Manual preview
930
Brand: OMCA Pages: 72
C.E. Nierhoff & Co C520 Troubleshooting Manual preview
C520
Brand: C.E. Nierhoff & Co Pages: 7
YASKAWA Motoman DX200 Maintenance Manual preview
Motoman DX200
Brand: YASKAWA Pages: 1166
hager univers N UC21LH1 Mounting Instructions preview
univers N UC21LH1
Brand: hager Pages: 13
hager univers N UK31LH1FM Mounting Instructions preview
univers N UK31LH1FM
Brand: hager Pages: 2
hager univers N UK21LH1M Mounting Instructions preview
univers N UK21LH1M
Brand: hager Pages: 3
TDI UltraFLEX HD User Manual preview
UltraFLEX HD
Brand: TDI Pages: 39
dadco 90.5B Series Maintenance Instructions preview
90.5B Series
Brand: dadco Pages: 2
Nuvair Voyager IV User And Maintenance Manual preview
Voyager IV
Brand: Nuvair Pages: 40
Spartan Equipment Angle Broom Owner'S/Operator'S Manual preview
Angle Broom
Brand: Spartan Equipment Pages: 21
JCI C070417 Operation And Service Manual And Parts Book preview
C070417
Brand: JCI Pages: 85
Enerpac SHC11020 Operation And Maintenance Manual preview
SHC11020
Brand: Enerpac Pages: 32
Westinghouse HKB Instructions Manual preview
HKB
Brand: Westinghouse Pages: 8
Kamstrup MULTICAL 403 Installation And User Manual preview
MULTICAL 403
Brand: Kamstrup Pages: 24
Giacomini GE556-6 Series Datasheet / Operating Instructions preview
GE556-6 Series
Brand: Giacomini Pages: 20
INOXPA Aseptic INNOVA Mini K Installation, Service And Maintenance Instructions preview
Aseptic INNOVA Mini K
Brand: INOXPA Pages: 28
OEZ SP-BHD-***-0001 Instructions For Use Manual preview
SP-BHD-***-0001
Brand: OEZ Pages: 12
OEZ OD-BL-KS09 Instructions For Use preview
OD-BL-KS09
Brand: OEZ Pages: 4

Brands by name

Popular brands

Load more brands