Siemens SIMATIC Box PC 820, Manual

Page: 164 / 196

9-2
Box PC 820 / PC FI45 V2, Manual
A5E00051531-03
9.1 Functionality
The CD-ROM drive enables you to update your STEP 5, STEP 7 and Windows 95
and Windows 98 software easily. The drive is operated via the secondary IDE
interface.
Opening the Drawer
By briefly pressing the eject button, the drawer springs out slightly. Now
pull the drawer out until it clicks into position.
Inserting / Removing CDs
Now insert the CD in the drawer with the label face up (Box PC 820) or to the left
(PC FI45 V2), and press it firmly down into the center of the turntable. To remove
the CD, hold it by the edges and pull upwards.
!
Caution
To avoid too much pressure on the open drawer, always hold the drawer at the
front with one hand when inserting or removing a CD.
Closing the Drawer
Push in the drawer until it closes completely. Do not press the eject button.
Note
The EJECT function offered by various applications for opening the CD-ROM
drawer does not work with this drive.
After the drawer has been closed, the CD is tested and the access display light on
the drive starts to flash:
– If the display flashes continually, the CD is faulty but can still be read.
– If the display flashes several times and then remains lit, the CD you have
inserted is defective and cannot be read.
CD-ROM Drive
StockCheck.com