Fault
Wash large and small items
together to reduce imbalances.
Not enough detergent.
Unsatisfactory washing
result.
Add a more appropriate amount
of detergent next time.
Grey residues on the
laundry.
Select Rinsing immediately, or
brush off spots when laundry is
dry.
Detergent residual on the
laundry.
The foam detection feature
has activated an additional
rinsing cycle to reduce the
amount of foam.
The program takes longer
than usual.
Repeated spinning at short
intervals.
Mix1 tablespoon of fabric softener
with 1/2 litre of water and pour
into chamber
I
of the detergent
dispenser.
Foam coming out of the
detergent dispenser.
Cause
Action
To much detergent.
Reduce the amount of detergent
next time.
This is not a fault.
The imbalance compensation system is attempting to balance
the load through repeated spins.
This is not a fault.
The imbalance compensat-
ion system is attempting to
balance the load by distrib-
uting the laundry more
evenly.
The degree of dirt was
higher than supposed.
Select a more suitable program.
Add detergent according to the
manufacturer's specifications.
Some phosphate-free
detergents contain
water-insoluble residues
that may appear as light
spots on the laundry.
Dirt accumulation from
ointments, fats or oils.
Add the maximum amount of det-
ergent and select the highest
permissible temperature next time.
Program duration changed
during the program sequence
Not a fault.
See also explanations in the chapter program duration
from page 10.
,,
, ,
Leak in the drain hose.
The thread of the supply
hose is not tight.
Water is flowing out from
underneath the machine.
Clean the water drainage pipe
and/or drain hose.
Fluff-producing laundry was
washed at a high temperat-
ure. The water drainage
pipe or drain hose is
blocked.
Loose debris is blocking
the pump.
Washing solution is not
completely drained.
Clean the pump.
(refer to Page 33)
Tighten the thread.
Replace the drain hose.
38
