Draining the washing
solution
The water in the drum should be drained first
before cleaning the drain pump.
Up to 20 litres. Have a suitable container ready.
This is necessary if the washing solution can not
be completely drained. The pump is blocked by
either loose debris or fluff which accumulates if
fluff-giving fabrics are washed at high temperature.
!
Allow the hot washing solution to cool.
Turn the program selector to Off .
Fold down the cover panel.
Cleaning the drain
pump
Risk of scalding
,,
, ,
Attach and close the cover plate.
Attach and tighten the pump cap.
Remove any loose debris/fluff from inside the
pump and clean the pump. The pump impeller
must be able to rotate.
Clean any residual suds or fluff from the thread
of the pump cap and pump housing.
Carefully remove the pump cap.But don t fully
remove it and allow a little more residual water
flow into the suitable container.
To avoid unused detergent from flowing into the
drain during the next wash cycle:
Pour 1 litre of water into chamber
II
.
Select the Draining program.
,,
, ,
,
33
