32
Cleaning water inlet
strainers
Cleaning the strainer at
the water tap
Cleaning the strainer on
the washing machine
This is necessary if very little or no water flows
into the washing machine.
First release the water pressure in the supply
hose:
Turn off the water tap.
Turn the programme selector to any programme.
(Except Spin or Drain )
Press the Start/Pause button, and allow the
programme to run for approx.40 seconds.
,,
, ,
, ,
,,
Disconnect the hose from the water tap.
Rinse the strainer under flowing water.
Reconnect the hose.
Disconnect the hose from the back of the
washing machine.
Pull out the strainer and rinse under running
water.
Insert the strainer and reconnect the hose.
Turn off the water tap.
Turn on the water tap and check whether water
is still discharged. If water is still discharged,
check that the strainer is attached properly.
,,
, ,
This Manual: http://www.manuallib.com/file/2488819
