12
The start in time is counted down by hour.
When the start in time has elapsed, the
programme starts automatically and the
remaining time is displayed.
If the programme was changed, the start in time
was terminated also. The LED will displays
remaining time. If required, reset the start in time.
The start in time can be changed at any
time before the programme starts. Press the
Time button until the required time appears.
The selected programme will not be changed.
,,
, ,
You can add/remove laundry during the start
in time works. Close the loading door immediate-
ly after finishing loading/removing.
Buzzer
The acoustic signal indicates:
that the Start/Pause button and additional
functions (buttons) has been switched on or off,
individual programme statuses (e.g. start of
programme, end of programme), operating
errors and faults.
,,
, ,
Signal for switching
buttons on and off
Press the Start/Pause button and set the
programme selector to
Lines Quick
.
Hold down the Start/Pause button until the
signal is emitted. The selected setting is stored.
When the additional functions is switched on,
the long signal is emitted; when the additional
function is switched off, the signal is short.
This function can be switched off by the same
way as switching on it.
,,
, ,
,,
, ,
Signal for programme
status and Start/Pause
button
,,
, ,
Set the programme selector to
Lines
Quick
,
press the Extra Rinse button and hold
on, you will hear the acoustic signal on and off
alternately, release the function button when the
signal is on, the buzzer of Start/Pause button
and programme status has been switched on.
,,
, ,
,,
, ,
This Manual: http://www.manuallib.com/file/2488819
