manualshive.com logo in svg

Siemens SICAM P37, Manual, Page: 17 / 56

Share
Download
Siemens SICAM P37 Manual Download Page 17

Functions

3.4 Display and Buttons

SICAM P37, 3-phase Harmonic Power Meter, User Manual

E50417-H8940-C563-

4

, Release Date 

06.2018

17

3.4

Display and Buttons

This product uses large-screen WVA multi-line LCD to provide visual and various display. The screen is 
provided with white backlight, enabling clear display in dark environment. Specific data information can be 
obtained through display with button operation. For details, see Chapter Operation and Display. 

3.5

Communication

RS485 port is provided for parameter setting and reading of various data. For specific description, see Chapter 
Communication. 

3.6

Permission and Security Management

1. This product is provided with programming permission management function.

    •  L0 password: used for meter reset, setting all parameters and modifying L0, L2 and L4 passwords; 

    •  L2 password: used for meter reset, setting all parameters and modifying L2 and L4 passwords;

    •  L4 password: used for parameter setting and modifying L4 password, not for meter reset, clearing extreme 

values and PT/CT ratio setting. 

    •  

All level default PASSWORD is "000000"

2. Parameter setting is available only when this product is in programmable state. Steps for entering 

programming state: press "

 " and "

" at the same time to enter "PASS" screen; input correct 

password and press "

" to enter "SET" screen and enable programmable state. After entering 

programmable state, programmable state prompt appears on the bottom right corner of LCD. Programmable 
state will remain valid in 10 minutes after program button is pressed and become invalid after power down. 

3. If incorrect password is used to set this product continuously (including communication setting and button 

programming) up to specific number of times (factory default 5 times), parameter setting function will be 
locked (factory default 60 minutes). Error count will be reset after setting once using correct password if such 
count is less than specific limit. Error count of password and lock time can be set (available in factory state). 

Summary of Contents for SICAM P37

























































Reviews:

No comments