Operation and Display
4.3 Key Definition
SICAM P30 P31 P32, 3-phase Current Power Meter, User Manual
E50417-H8940-C561-
, Release Date
20
Note
Password level (1 bit, 0 to 2) and password (6 bits) should be entered at first for key setting. Password level
and permission:
• L0 password-all parameters above are configurable;
• L1 password-all parameters above are configurable;
• L2 password-all parameters except for clearing extreme value and PT/CT conversion ratio are configurable.
All default password is 000000.
3. Parameter setting with keys (take "Conn communication setting" for example)
Figure 4-2
Parameter setting with keys
At any time, press "
" and "
" simultaneously to enter "PASS" screen. The first digit of displayed data
means password level and the remaining 6 data make up the password (press "
▲
" to change digits and "
▼
"
to move cursor). Press "
" to confirm. "FAIL" will appear if password level and password are wrong. To re-
enter password, press "
". To quit and return to cyclic display state, enter "
" (if specified error count is
4
Clearing
extreme
value
5
Display
setting
Time of returning to
cyclic display state
when no operation
1 ... 99
Unit: min.
Default setting: 10
Time of backlight
on when no opera-
tion (normally on
when set to 0)
0 ... 99
Unit: min.
Default setting: 10
Interval of cyclic
display
1 ... 99
Unit: sec
Default setting: 5
NO.
1
st
level menu
2
nd
level menu
Symbol
Definition
Symbol
Definition
Range
Remarks