Operation and Display
4.3 Key Definition
SICAM P30 P31 P32, 3-phase Current Power Meter, User Manual
E50417-H8940-C561-
, Release Date
18
Example 3:
This screen shows maximum value display items of phase
current.
At cyclic display mode, press "
▲
" or "
▼
" to enter key display
mode. Press "
▲
" or "
▼
" again to switch to phase current
display items. Press "
" to enter maximum value display.
In the figure, L1=1.020 A, L2=1.031 A, L3=1.032 A and
maximum value of average phase current =1.027 A. Press
"
▲
" or "
▼
" to switch to minimum value display of phase
current and press "
" to return to previous display.
Example 4:
This screen shows CT ratio display items.
At cyclic display mode, press "
▲
" or "
▼
" to enter key display
mode. Press "
▲
" or "
▼
" again to switch to CT ratio display
items.
In the figure, CT ratio=5.
(Note: decimals part of ratio are not displayed.)
Example 5:
This screen shows display items of software version number.
At cyclic display mode, press "
▲
" or "
▼
" to enter key
display mode. Press "
▲
" or "
▼
" again to switch to display
items of software version number.
In the figure, "Soft" means software version, "13" means
product specification, "121121" means software version date
and "00" means serial number of software production.
Example 6:
This screen shows device number display items.
At cyclic display mode, press "
▲
" or "
▼
" to enter key display
mode. Press "
▲
" or "
▼
" again to switch to device number
display items. Device number=000000000001.
Example 7:
This screen shows fault code display items.
At cyclic display mode, press "
▲
" or "
▼
" to enter key display
mode. Press "
▲
" or "
▼
" again to switch to fault code display
items. "E" means fault, the 3 bits from right to left mean re-
spectively phase C reverse, phase B reverse, and phase A re-
verse. Other 4 bits are meaningless. For example,
"E0000001" means phase C reverse fault occurs.