NL Troubleshooting
Malfunction
Cause
Troubleshooting
E:90-01 lights up alternately. Mains voltage is too low.
There is no error in the device.
1.
Contact an electrician.
2.
Have the mains voltage and
electrical installation checked by
the electrician.
Another one appears
There is a technical malfunction
error code in the indicator - present.
star.
1.
Press .
2.
Disconnect the appliance from
the mains or switch off the
fuse.
E:01-00 to E:90-10
3.
Wait at least 2 minutes.
4.
Plug the appliance into a
mains socket or switch on
the fuse.
5.
Switch on the device.
6.
If the problem occurs
again:
s
Press .
s
Close the tap.
s
Remove the plug from the
socket.
s
Contact the "service
Page 55 and mention the
error code.
Washing result
Malfunction
Cause
Troubleshooting
Crockery is not dry.
No rinse aid has been
used or the dosage is
set too low.
1.
Fill the "rinse agent"
2.
Set the amount of rinse aid.
The program or program
option has no drying phase or a
drying phase that is too short.
"
The drying result is reduced with
some option buttons, eg
Variospeed.
42