Rinse System NL
Regenerate the softening
system
Filling rinse aid
If the rinse aid refill indicator lights
up, add rinse aid. Only use rinse aid
for domestic dishwashers.
In order to maintain trouble-free
operation of the softening system,
the device regularly performs a
regeneration of the softening system.
The softening system is regenerated
in all programs before the end of the
main wash cycle. This increases the
running time and the consumption
values of, for example, water and
electricity.
1.
Press and lift the tab on the lid of
the rinse aid container .
2
Overview of the consumption values
when regenerating the
softening system
Here you will find an overview of the
maximum additional runtime and
consumption values when regenerating the
1
softening system.
2.
Top up the rinse aid up to the max
mark.
Regenerating the softening
system after x washings
6
Additional running time in minutes
Additional water consumption in liters
Additional electricity consumption in kWh
7
5
0.05
The stated consumption values are
laboratory measured values, which
are determined according to the
currently valid standard and based on
the Eco 50° program and the factory-
set water hardness value of 13 - 16
°dH.
max
3.
If rinse aid has spilled over, it must
be removed from the rinse aid
container.
G
G
lance flushing system
lance flushing system
Rinse aid spilled over can cause
excessive foaming during the wash
cycle.
Rinse System
rinse aid
4.
Close the lid of the rinse aid
reservoir.
For optimal drying results it is best
to use the rinse aid.
Only use rinse aid for household
dishwashers.
a The lid audibly clicks into place.
25
