Siemens se5880 User Manual Download

Page: 50 / 86

SIEMENS se5880 Ethernet Security Router
User’s Guide

Chapter 5 Advanced Setup

Switch Management

SIEMENS

Switch Mirror Configuration

The router supports traffic mirroring on the Ethernet switch. This means that Ethernet traffic from any of the
Ethernet ports is mirrored to a target port for analysis. This function facilitates the unobtrusive monitoring of
source port activity.

To configure port traffic mirroring:

1. Click

Mirror/Capture Configuration

from the left navigation pane of the Switch Status page. This displays

the Switch Mirror Configuration page.

2. Under

Mirror Port

, select one or more of the mapped ports (or source ports) you want to mirror.

3. Under

Capture Port

, select the port to receive the Ethernet traffic for all mirrored ports.

4. For

Mirror Feature

, click

Enable

Disable

to enable or disable mirroring.

5. Click

Apply

Summary of Contents for se5880























































































Search results

Summary of Contents for se5880

Reviews:

Related manuals for se5880

Brands by name

Popular brands

Siemens se5880, User Manual

Search results

Summary of Contents for se5880

Reviews:

Related manuals for se5880

Brands by name

Popular brands