Siemens SCALANCE XP-200, Operating Instructions Manual

Page: 87 / 94

Approvals
SCALANCE XP-200
Operating Instructions, 05/2016, C79000-G8976-C428-01
87
ATEX (explosion protection directive)
WARNING
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that
the associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subasseblies/modules in a Zone 2 Hazardous
Area".
You will find this document
• on the data medium that ships with some devices.
•
on the Internet pages of Siemens Industry Online Support
( http://support.automation.siemens.com/WW/view/en ).
Enter the document identification number C234 as the search term.
The SIMATIC NET products meet the requirements of the EC directive 94/9/EC "Equipment
and Protective Devices for Use in Potentially Explosive Atmospheres”. and as of 20.04.2016
the EC directive 2014/34/EU.
ATEX classification:
II 3 G Ex nA IIC T4 Gc
KEMA 07ATEX0145 X
The products meet the requirements of the following standards:
● EN 60079-15 (electrical apparatus for potentially explosive atmospheres; Type of
protection "n")
● EN 60079-0 (Explosive atmospheres - Part 0: Equipment - General requirements)
You will find the current versions of the standards in the currently valid ATEX certificates.
ATEX - use in hazardous areas Zone 2 / Zone 22
This section contains important information on installation in hazardous areas Zone 2 / Zone
22
You will find the EC Type Examination Certificate with the approved products on the Internet
with the following link: Service & Support
( http://support.automation.siemens.com/WW/view/de/71748103 )
ATEX classification
II 3 G Ex nA IIC T4 Gc
II 3 D Ex tc IIIC T90°C Dc IP67
DEKRA 12 ATEX 0220 X
The products meet the requirements of the following standards:
● EN 60079-15: Electrical apparatus for explosive gas atmospheres, Part 15: Type of
protection "n"
● EN 60079-31: Explosive atmospheres, Equipment dust ignition protection by enclosure "t"