Siemens SCALANCE XB-100 Series Operating Instructions Manual Download Page 9 | Manualshive

Page: 9 / 54

background image

Safety notices

2

Read the safety notices

Note the following safety notices. These relate to the entire working life of the device.
You should also read the safety notices relating to handling in the individual sections,

particularly in the sections "Installation" and "Connecting up".

CAUTION

To prevent injury, read the manual before use.

Safety notices on use in hazardous areas

General safety notices relating to protection against explosion

WARNING

EXPLOSION HAZARD
Do not open the device when the supply voltage is turned on.

Safety notices when using the device according to Hazardous Locations (HazLoc) and FM.
If you use the device under HazLoc or FM conditions you must also keep to the following safety

notices in addition to the general safety notices for protection against explosion:
This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-hazardous

locations only.
This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations only.

SCALANCE XB-100

Operating Instructions, 02/2019, C79000-G8976-C473-03

9

«
...
7
8
9
10
11
...
»

Summary of Contents for SCALANCE XB-100 Series























































Reviews:

No comments

Related manuals for SCALANCE XB-100 Series

Brand: GE Pages: 36

Brand: GE Pages: 8

Switch 4500 Family

Brand: 3Com Pages: 16

PathBuilder S200 Series

Brand: 3Com Pages: 32

ePowerSwitch 8M+R2

Brand: Neol Pages: 74

Brand: Qlogic Pages: 135

SANbox2 SANbox2-64

Brand: Qlogic Pages: 224

Brand: Matrix Switch Corporation Pages: 60

Brand: Atlantis Land Pages: 3

FortiSwitch 424E Series

Brand: Fortinet Pages: 11

Brand: Jerguson Pages: 4

Brand: enbrighten Pages: 2

Brand: Larson Electronics Pages: 2

ControlZAPP CZ CESR 10VDC

Brand: DANLERS Pages: 2

Brand: Radio Shack Pages: 8

Brand: Black Box Pages: 50

SECURVIEW SV-7020

Brand: CrimeStopper Pages: 1

Brand: Abtus Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands