Siemens SCALANCE X005 Operating Instructions Manual Download Page 31

Page: 31 / 38

SCALANCE X005 / X005TS
Operating Instructions, 07/2014, C79000-G8976-C344-01

Approvals

The SIMATIC NET products described in these Operating Instructions have the approvals

listed below.

Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.

You can check which of the following approvals have been granted for your product by the

markings on the type plate.

8.1

Approvals_intro_X-000

The following approvals apply to the SCALANCE X005 and SCALANCE X005TS.

EMC directive

The devices meet the requirements of the EC Directive 2004/108/EC "Electromagnetic

Compatibility".

Area of application

The devices are designed for installation in an industrial environment:

Area of application

Requirements for

Emission

Immunity

Industrial area

EN 61000-6-4 : 2007 + A1 : 2011

EN 61000-6-2 : 2005 + AC : 2005

Installation Guidelines

The devices meet the requirements if you keep to the installation instructions and safety-

related notices as described here and in the manual "SIMATIC NET Industrial Ethernet

Twisted Pair and Fiber Optic Networks

(

http://support.automation.siemens.com/WW/view/en/8763736

)" when installing and

operating the device.

Summary of Contents for SCALANCE X005







































Search results

Summary of Contents for SCALANCE X005

Reviews:

Related manuals for SCALANCE X005

Brands by name

Popular brands

Siemens SCALANCE X005, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X005

Reviews:

Related manuals for SCALANCE X005

Brands by name

Popular brands