manualshive.com logo in svg

Siemens SCALANCE TAP104, Operating Instructions Manual

Share
Download
Siemens SCALANCE TAP104 Operating Instructions Manual Download Page 46

Marking for the customs union

EAC (Eurasian Conformity)

Eurasian Economic Union of Russia, Belarus, Armenia, Kazakhstan and Kyrgyzstan

Declaration of conformity according to the technical regulations of the customs union (TR ZU)

Installation guidelines

The devices meet the requirements if you adhere to the installation and safety instructions 
contained in this documentation and in the following documentation when installing and 
operating the devices.

• "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual (

https://

support.industry.siemens.com/cs/ww/en/view/27069465

)

• "Industrial Ethernet / PROFINET - Passive Network Components" System Manual (

https://

support.industry.siemens.com/cs/ww/en/view/84922825

)

• "EMC Installation Guidelines" configuration manual (

https://

support.industry.siemens.com/cs/ww/en/view/60612658

)

WARNING

Personal injury and property damage can occur

The installation of expansions that are not approved for SIMATIC NET products or their target 
systems may violate the requirements and regulations for safety and electromagnetic 
compatibility.

Only use expansions that are approved for the system.

Note

The test was performed with a device and a connected communications partner that also meets 
the requirements of the standards listed above.

When operating the device with a communications partner that does not comply with these 
standards, adherence to the corresponding values cannot be guaranteed.

Certifications and approvals

SCALANCE TAP

46

Operating Instructions, 06/2022, C79000-G8976-C447-03

Summary of Contents for SCALANCE TAP104

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands